Rustler 4x4 Ultimate

This Combo Includes:Traxxas Rustler Ultimate 4x4 TruckEZ-Peak ID LiPo Charger11.1V 3S 4000mAh LiPo Battery Capable of 60+MPH top speed with included high-speed pinion gear! This is the Traxxas Rustler 4x4 VXL Ultimate 1/10 Fully-Assembled Ready-To Race...

This is the Traxxas Rustler 4x4 VXL Ultimate 1/10 Fully-Assembled Ready-To Race Stadium Truck with waterproof electronics, TQi 2.4 GHz 2-channel radio system with preinstalled Wireless Module and telemetry sensors, Velineon brushless power system, and...

This is the Traxxas EZ-Peak Dual iD 100W LiPo and NiMH charger. It will charge two 2S-3S LiPo, and 5-8 cell NiMH battery packs. The EZ-Peak Dual charger works with both iD batteries, and standard LiPo or NiMH with Traxxas high-current connectors. Charge...

This is the Traxxas EZ-Peak Plus 4-Amp Auto-iD LiPo and NiMH Charger. It will charge 2S-3S LiPo, and 5-8 cell NiMH battery packs. The EZ-Peak Plus 4-Amp charger works with the Traxxas iD style battery plugs, as well as the Traxxas high-current plug. It...

This is the Traxxas Power Cell 11.1V 5000mAh 25C 3S LiPo Battery with iD Connector. Traxxas 5000mAh Power Cell LiPo packs are ideal for Slash VXL, Slash 4x4 VXL, 1/10 Rally, XO-1 Supercar, E-Maxx Brushless, E-Revo Brushless and Spartan modelsPower Cell...

This is the Traxxas Power Cell 7.4V 5800mAh 25C 2S iD LiPo Battery with iD Connector. Traxxas 5800mAh Power Cell LiPo packs are ideal for all XL-5 and VXL Rustler, Stampede, Stampede 4x4, Bandit, Funny Car, and Monster Jam models, as well as the Spartan...

This is the Traxxas 5200mAh 7.4V 2S 2-Cell HardCase LiPo Battery w/iD Connector Power Cell HardcaseDesigned for spec-class racing, this 7.4-volt 2-cell LiPo battery features a tough outer hard case to protect against crash damage and meets sanction race...

This is the Traxxas EZ-Peak Live Dual iD 200-Watt Charger for LiPo and NiMH batteries. The new EZ Peak Live Dual Output iD Charger is the most advanced, most powerful charger ever from Traxxas! As with other EZ Peak iD chargers, these are compatible with...

This is the Traxxas Power Cell 11.1V 4000mAh 25C 3S LiPo Battery with iD Connector. The Traxxas 2849X 4000mAh Power Cell LiPo packs are ideal for Rustler VXL, Stampede 2WD VXL, Stampede 4x4 VXL, Bandit VXL, and Traxxas Funny Car models.Power Cell LiPo...

This is the Traxxas 5000mAh 8.4V 7-Cell NiMH Flat Battery Pack with iD Battery Connector. This battery is perfect for vehicles like the Slash XL-5, Slash VXL, Slash 4x4, E-Maxx, E-Revo, Summit, 1/10 Rally, and other vehicles. Experience the longest run...

This is the Traxxas 2985-3S EZ-Peak ID 40W USB-C Charger & 3S 5000mAh LiPo Battery Completer 3s LiPo USB-C Completer Pack with Traxxas iD Technology Power and ConvenienceThe 3s LiPo USB-C completer pack is the perfect companion for your Velineon...

This is the Traxxas 7600mAh 2-Cell 7.4V LiPo battery pack with iD connector. The Traxxas 7600mAh 2-Cell LiPo battery packs are ideal for the Slash XL-5, Slash VXL, Slash 4x4, 1/10 Rally, E-Maxx 16.8V, E-Maxx Brushless, E-Revo 16.8V, E-Revo Brushless,...

This is the Traxxas Tool Set with Carrying Case. This is the must-have set for all Traxxas owners. It comes with a six Allen/Hex drivers, five nut drivers, three Phillips head screwdrivers, three flat-head screw drivers, and an dual-end open-ended...

This is the Traxxas 2970-2SR EZ-Peak ID 4-Amp Auto-iD NiMH/LiPo Charger & 2S 5200mAh Hardcase LiPo Battery Completer EZ-Peak CompleterThe 2s LiPo hard case completer pack includes a 2844R 2-cell 5200 mAh 7.4 volt LiPo battery and a 2970 EZ-Peak 4-amp...

This is the Traxxas EZ-Peak Plus 4s, 8-Amp Auto-iD NiMH/LiPo with iD Auto Battery Identification Charger. With up to 8-amps of output it will charge 2S-4S LiPo, and 5-8 cell NiMH battery packs. The EZ-Peak Plus 4s, 8-Amp charger works with the Traxxas iD...

This is the Traxxas EZ-Peak Live 12-Amp ID Charger. With up to 12-amps of output and the ability to operate the charger via Bluetooth from your iOS or Android device, this is the most powerful, most advanced charger ever from Traxxas!Traxxas iD...

This is a replacement antenna tube. Antenna tubes are used to help secure and protect reciever antenna wires. INCLUDES:1 blue antenna tube and 1 black antenna tube cap. SPECIFICATIONS:Length: 11"Outside Diameter: 1/8"

This is the Traxxas TQi 2.4GHz 5-Channel Micro Receiver with Telemetry and TSM The 6533 TQi 2.4 GHz receiver stores up to thirty Traxxas Link enabled transmitters in memory. Integrated telemetry ports allow real-time data to transmit from your Traxxas...

This is Silicone grease that is used throughout most all of the Traxxas kits, it can also be used in most any R/C greasing application.  (1- tube of grease approximately 1 oz.)

This is the Traxxas TQi 2.4 GHz High Output 2-Channel Radio System with Traxxas Link Enabled and TSM 2-Ch Transmitter, 5-Ch Micro Receiver) Replaces transmitter: TRA6509R

This is the Traxxas TQi 2.4 GHz High Output radio system, 4-channel with Traxxas Link Bluetooth module and TSM 4-Ch Transmitter, 5-Ch Micro Receiver) Replaces transmitter: TRA6507R

This is the Traxxas Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1)) Includes aluminum friction pads (3), spring, pin, 5x8 washer, 4 mm locking nut, and 5 mm...

This is the Traxxas Transmitter TQi Traxxas Link Enabled 2.4GHz High Output 3-channel (Transmitter Only) The 3-channel TQi transmitter combines a full complement of tuning features with the long-range convenience of 2.4 GHz technology. Automatic model...

This is the Traxxas Transmitter TQi Traxxas Link enabled 2.4GHz high output 2-channel (Transmitter Only) The 2-channel TQi transmitter combines a full complement of tuning features with the long-range convenience of 2.4 GHz technology. Automatic model...

This is the Diff Carrier/Gasket Set Replacement differential carrier includes X-ring gaskets (2), ring gear gasket, and 6x10x0.5 mm washer. FEATURES:Plastic Diff CarrierBlue Rubber Shaft GasketsBlack Rubber Diff Carrier GasketsGray Teflon...

This is the Traxxas 5000mAh 7.4v 2-Cell 25C LiPo Battery (short/137mm). This new shorter design allows this 2S 5000mAh pack to fit in tighter compartments, making it a great option for Stampede 2WD, 4x4, Rustler, and Bandit vehicles.Fits1/10 E-Revo...

This is the Diff Oil Kit for the Revo by Traxxas. Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential by using higher or lower viscosity oil. Depending on the track conditions,...

This is the Traxxas Rear Steel-Spline Constant-Velocity Driveshafts (Complete Assembly) (2) Traxxas steel constant velocity driveshafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a...

This is the Traxxas 2075X Digital High-Torque Metal Gear Waterproof Ball Bearing Servo. This is the stock steering servo on the TRX-4 Trail Crawler. It can be used as an upgrade for any 1/10 Traxxas vehicle currently running a standard 2075 servo. The...

This is the Traxxas Temperature Sensor Mount for Electric Motors when using the TQi Telemetry System. Includes: Mount, Plastic Tie, and Thermal Pad The temperature sensor mount secures the temperature sensor to your electric motor with a thermal pad and...

This is the Traxxas Alloy Slipper Pressure Plate and Hub for the Revo 2.5, 3.3, E-Revo, E-Revo Brushless, E-Maxx 16.8V, and E-Maxx Brushless trucks. These are part of the slipper assembly.

This is the Traxxas Orange 6061-T6 Aluminum Center Driveshaft for Rustler 4x4. Formed from 6061-T6 aluminum, this 189 mm center driveshaft is both strong and lightweight. Internal splines fit directly onto the input shafts of the front and rear drive...

This is the Traxxas 600 Brushless Digital High-torque Metal Gear Ball Bearing Waterproof Servo High-Torque 600 Brushless Digital ServoThe Traxxas High-Torque 600 brushless servo is the ultimate steering upgrade for your 1/10 or 1/8 scale vehicle. With...

This is the Traxxas 330 Digital High-Torque Coreless Metal Gear Ball Bearing Waterproof Servo, with an output of up to 330 oz/in of torque.High-Torque 330 Blue ServoThe Traxxas High-Torque 330 Blue servo combines maximum steering authority with a long...

This is the Traxxas Front 37T Differential Ring and 13T Pinion Gear 37-tooth ring and 13-tooth pinion gears for front differentials. Replacement Part ForFord Fiesta ST RallyFord F-150 Raptor R 4X4Ford Fiesta ST Rally BrushlessFord Fiesta ST RallyHoss 4X4...

This is the Traxxas Differential ring gear, pinion gear, (machined spiral cut) (rear) Spiral-cut 37-tooth ring and 13-tooth pinion differential gear sets are CNC-machined from a solid block of steel. The teeth are cut with a slight curve to minimize...

These are the Traxxas Pink Aluminum 4mm Flanged Wheel Nuts (4). These wheel nuts fit a wide variety of Traxxas vehicles. Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the perfect finishing touch for your vehicle. The...

This is a package of six 3x6mm Traxxas Button Head Screws. Features: Steel construction Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x6mm button head screw is required Includes: Six...

This is the Traxxas Differential, rear (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash, Stampede, Rustler) (13/37 ratio)The Pro-BUILT 4X4 rear differential comes professionally assembled for easy...

This is the Traxxas Complete Transmission for 1/10 2WD Rustler, Bandit, Stampede, and Slash trucks.  This comes pre-assembled with internal gears, slipper clutch, and spur gears, making for an ultra-simply swap to get you back out racing or bashing...